cnc non-standard parts machining
For general taps for machining non-standard parts, use half-diameter electrodes to remove broken taps. The large tap, the broken screw is processed with a hexagonal electrode, and then a hexagonal wrench is used to take it out. Other broken tools and kni
Non-standard parts machining
[Product name]: manifold
[Affiliation]: CNC lathe machining
[Material quality]: A6061
[machining technology]: CNC machining
[machining accuracy]: 0.05
[Surface treatment]: Oxidized black
Turning technology method for machining non-standard parts
1. For general taps for machining non-standard parts, use a half-diameter electrode to remove the broken taps. The large tap, the broken screw is processed with a hexagonal electrode, and then a hexagonal wrench is used to take it out. Other broken tools and knives are processed with electrodes of suitable shape and size.
2. Non-standard parts machining sequence: Put a metal plate in the plastic container-fix the processed part and the machining head-(the magnetic base should not be placed in water)-install the brass electrode into the chuck and fasten it, The electrode diameter is half of the nominal diameter of the tap-connect the cable, connect the wire clamp to the processed part-find the position of the positive electrode and the tap, the distance is 1-2 mm, adjust the stroke indication position-into the container Add working fluid, at least 10mm higher than the surface of the part-turn on the main power switch-select the machining current-press the start button to start machining-the machining ends (reach the set depth) automatically stop machiningg, manual operation to raise the electrode.