Technical requirements for machining parts

The surface of the processed thread is not allowed to have defects such as black skin, bumps, random buttons and burrs. Before painting the surface of all steel parts that need to be painted, rust, oxide scale, grease, dust, soil, salt and dirt must be re


Contour processing of parts

1. The unmarked shape tolerance should meet the requirements of GB1184-80.

2. The allowable deviation of unmarked length dimension is ±0.5mm.

3. No fillet radius R5.

4. All unfilled chamfers are C2.

5. The sharp angle is obtuse.

6. The sharp edge is dull, and the burr and flash are removed.

Surface treatment of parts

1. There should be no scratches, abrasions and other defects that damage the surface of the part.

2. The surface of the processed thread is not allowed to have defects such as black skin, bumps, random buttons and burrs. Before painting the surface of all steel parts that need to be painted, rust, oxide scale, grease, dust, soil, salt and dirt must be removed.

3. Before removing rust, use organic solvent, lye, emulsifier, steam, etc. to remove grease and dirt on the surface of steel parts.

4. The time interval between the surface to be coated by shot blasting or manual derusting and the primer coating should not be more than 6h.

5. The surfaces of the riveting parts in contact with each other must be painted with anti-rust paint with a thickness of 30-40μm before connecting. The lap edges should be sealed with paint, putty or adhesive. The primer damaged by processing or welding must be repainted.


Latest news and stories

machining mold
04-10

precision manufacturing machining mold development trend

Lathe manufacturers analyze several development trends in the manufacturing process of mold base mol […]

machining concept
04-10

non-standard parts machining concept

Non-standard parts machining manufacturers: Talking about the concept of non-standard parts machinin […]

precision requirements
04-06

CNC machining precision requirements

Use a milling cutter with a larger diameter, and the rotation speed should be as high as possible, b […]