Why use KME's injection molding

dmf feedback and online quote

Accurate quotation and design analysis

We promise to provide the most accurate quotation within 12 hours. For every order of KME Technology, we will provide professional DfM analysis and mold flow analysis strong>, and send design feedback for free .

strong capabilities

Project management and strong capabilities

During the production process, KME Technology provides timely progress feedback and coordination to ensure consistent high quality and on-time delivery. We have 2,000㎡ in-house factory which represents our highest manufacturing capacity.

Guaranteed quality RD

Guarantee quality and after-sales service

For the Injection molding order of KME Technology, the first article inspection service is available on request. We implement standard quality acceptance procedures, record 4-6 hours of mold trial before production, and provide all relevant documents.

Injection ability

Fast tooling service

Rapid prototyping tools use aluminum blades to make tools. This method is only suitable for a small number of products, provides design flexibility, reduces mold costs, and shortens the delivery time to about 1-2 weeks.

Ideal for mass production of plastic injection molded parts. Tooling costs are higher than fast tooling, but the unit cost is very high. The lead time for production tooling is usually about 3-4 weeks.

Series molds reduce mold costs by accepting different shapes into the same mold. By utilizing the manufacturing efficiency of molds and the flexibility of custom tools, the process is very suitable for medium-volume prototypes of various shapes

Multi-cavity molds are most suitable for high-volume, repeatable parts that contain the same cavities to increase production and reduce lower unit costs.

The existing molded parts are installed in the mold and then covered with new materials. This two-step process achieves the flexibility of multi-material part design by creating molds with different structural materials

Get a free quote for your injection project now!

Material

From hundreds of commercial grade metal materials suitable for CNC& prototyping and production, magnesium alloy, aluminum alloy, stainless steel, its rigidity and lightness Choose among qualitative applications.

magnesium alloy

The rigidity of magnesium alloy can be superior to that of plastics. At the same time, its lightness reflects the advantages of magnesium alloy in metal materials, and it is lighter than plastics. It is an ideal material for military and aviation products.

Lightweight


  • AZ91D
  • ZK61
  • AZ31
  • AZ61
  • AM60
  • other
Magnesium alloy material processing

Aluminum alloy

Aluminum alloys are widely used in engineering structures and components that require light weight or corrosion resistance, and aluminum alloys with a wide range of properties are used in engineering structures.

Corrosion resistance


  • 2A12
  • 5052
  • 6061
  • 6063
  • 5A06
  • 7075
  • other
Aluminum alloy product machining

stainless steel

Corrosion and stain resistance, low maintenance costs, and familiar gloss make stainless steel an ideal material for many applications that require the strength and corrosion resistance of steel.

Rigidity


  • 303
  • 304
  • 316
  • other
rubber plastic material

Customer self-developed materials

If you want to provide materials for manufacturing parts, please fill in the form below and upload two required documents. After processing your information, we will continue to provide shipping information and material ID numbers. If you provide metal materials, please note that we only accept magnesium alloy, aluminum alloy, and stainless steel packaging materials.

Subtype


  • Magnesium alloy
  • Aluminum alloy
  • Stainless steel
  • Plastic outsourcing processing
rubber plastic material

Finish

For most injection molded parts, no post-processing is required. This is because the mold itself is usually finished to different levels and directly affects the surface finish of the molded part.

Glossy paint

High-end finishes made using diamond polishing technology can produce a shiny surface.

光滑的完成图像
Semi-gloss

Grade B finishes are sanded with sandpaper to produce parts that are slightly rougher than Grade A finishes. Products that have undergone B-level finishing have rough surface textures.

半光泽的完成图像
Matt

Grade C finishes use gravel polished stones to produce a rough, uneven surface. The C-level finished product has a rough surface texture.

Matte Image
Textured finish

Grade D finishes use coarse sand and dry glass beads or oxides to make very rough finishes. Depending on the type of material used, the product can have a satin or dull finish.

镁合金质感饰面

First part verification

In order to make customers feel at ease before putting them into production, we provide the first part of verification. This program enables our customers to verify the first batch of parts internally, which is common for injection molding orders and is particularly required for CNC machining.

As part of KME Technology’s "First Part Verification" program, we will ship two sets of parts to customers for verification and approval. After the parts are verified, we can put them into full production. This product is designed to enable our customers to enter production with confidence.

Put parts into production immediately

You can complete your project in only 4 simple steps. Follow the instructions!

file upload icon

upload files

arrow down
quotation icon

Get a quote

arrow up
place order icon

Place an order

arrow down
start production

Start production